164 Appendix
WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
Manual
Version 2.0.0
14.1.6.2 2-Channel Pulse Width Modules
There is one module type for the 2-channel pulse width modules.
Table 81: Module Types – 2-Channel Pulse Width Output Modules
Module type
Description
Substitute I/O modules
2PWM
2-Channel Pulse Width Output Modules,
16 bits output data per signal channel
75x-511,
plus all variations
Pulse width output modules receive the provider status (IOPS) from the IO
controller and supply it with the consumer status (IOCS) of the received output
information in case only the actual user data is exchanged. If all existing
information is available in the process image of the inputs and outputs, the process
data qualifiers are also transmitted in the opposite direction.
There are the following submodule types for the 2-channel pulse width modules.
Table 82: Submodule Types and Data Lengths – 2-Channel Pulse Width Output Module
PNIO module type
Process data length [byte]
Telegram
allocation [byte]
PNIO submodule type
Data type
Input (I-PI) Output (O-PI) Input
Output
2PWM
2PWM
Integer16
0
4
1
5
2PWM, EM
{Unsigned8,
Unsigned16}
6
6
8
8
