WAGO-I/O-System 750
Appendix 171
750-370 PROFINET IO Fieldbus Coupler
Manual
Version 2.0.0
14.1.6.10 MP-Bus Master Modules
There is one module type for the MP-Bus master modules.
Table 97: Module Types – MP-Bus Master Modules
Module type
Description
Substitute I/O modules
MP-Bus-Master
MP-Bus Master Modules
75x-643
For the MP-bus master modules, the provider and consumer status (IOPS, IOCS)
of the input or output information are exchanged between the IO controller and IO
device in both directions.
There is the following submodule type for the MP-Bus master modules.
Table 98: Submodule Types and Data Lengths – MP-Bus Master Modules
PNIO module type
Process data length [byte]
Telegram
allocation [byte]
PNIO submodule type
Data type
Input (I-PI) Output (O-PI) Input
Output
MP-Bus-Master
MP-Bus-Master
{Unsigned8[2],
Unsigned8[6]}
8
8
10
10
14.1.6.11 Vibration Monitoring
There is one module type for the vibration monitoring.
Table 99: Module Types – Vibration Monitoring
Module type
Description
Substitute I/O modules
VIB I/O
2-Channel Vibration Velocity / Bearing
Condition Monitoring VIB I/O
75x-645
For the 2-channel vibration velocity/bearing condition monitoring VIB I/Os, the
provider and consumer status (IOPS, IOCS) of the input or output information are
exchanged between the IO controller and IO device in both directions.
There is the following submodule type for the vibration monitoring.
Table 100: Submodule Types and Data Lengths – Vibration Monitoring
PNIO module type
Process data length [byte]
Telegram
allocation [byte]
PNIO submodule type
Data type
Input (I-PI) Output (O-PI) Input
Output
VIB I/O
VIB I/O
{Unsigned8,
Unsigned16
Unsigned8,
Unsigned8[2]}
12
12
14
14
