WAGO-I/O-System 750
System Description
21
750-370 PROFINET IO Fieldbus Coupler
Manual
Version 2.0.0
Pos: 18.10 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Gerät und System/Komponenten-U pdate-Matri x @ 3\mod_1231757422359_21.docx @ 25928 @ 2 @ 1
3.3
Component Update
For the case of an update of one component, the lateral marking on each
component contains a prepared matrix.
This matrix makes columns available for altogether three updates to the entry of
the current update data, like production order number (NO; starting from calendar
week 13/2004), date stamp (DS), software version (SW), hardware version (HW)
and the firmware loader version (FWL, if available).
Current version data for
1. Update 2. Update 3. Update
Production order no.
NO
only starting from
Date stamp
DS
calendar week 13/2004
Software version
SW
Hardware version
HW
Firmware loader vers.
FWL
only for fieldbus
couplers/controllers
If the update of a component took place, the current version data are registered
into the columns of the matrix.
Additionally with the update of a fieldbus coupler or controller also the cover of
the configuration and programming interface of the fieldbus coupler or controller
is imprinted with the current production order number.
The original manufacturing information on the device's housing remains
unchanged.
Pos: 18.11 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Gerät und System/Lagerung, Kommissi onierung und Tr ansport @ 3\mod_1225446600609_21.docx @ 24897 @ 2 @ 1
3.4
Storage, Assembly and Transport
Whenever possible, the components are to be stored in their original packaging.
Likewise, the original packaging provides optimal protection during transport.
When assembling or repacking the components, the contacts must not be soiled or
damaged. The components must be stored and transported in appropriate
containers/packaging. Thereby, the ESD information is to be regarded.
Pos: 18.12 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
