WAGO-I/O-System 750
System Description
33
750-370 PROFINET IO Fieldbus Coupler
Manual
Version 2.0.0
Pos: 18.15.34 /Seri e 750 ( WAGO-I/O-SYSTEM)/Systembeschr eibung/Versorgung/Ergänzende Einspeisungsvorschriften (Standar d) @ 3\mod_1232950080218_21.docx @ 26684 @ 3 @ 1
3.6.4
Supplementary Power Supply Regulations
The WAGO-I/O-SYSTEM 750 can also be used in shipbuilding or offshore and
onshore areas of work (e. g. working platforms, loading plants). This is
demonstrated by complying with the standards of influential classification
companies such as Germanischer Lloyd and Lloyds Register.
Filter modules for 24 V supply are required for the certified operation of the
system.
Table 8: Filter Modules for 24 V Supply
Order No. Name
Description
750-626
Supply Filter Filter module for system supply and field supply
(24 V, 0 V), i. e. for fieldbus coupler/controller and
bus power supply (750-613)
750-624
Supply Filter Filter module for the 24 V field supply
(750-602, 750-601, 750-610)
Therefore, the following power supply concept must be absolutely complied with.
Figure 15: Power Supply Concept
Use a supply module for equipotential bonding!
Use an additional 750-601/ 602/ 610 Supply Module behind the 750-626 Filter
Module if you want to use the lower power jumper contact for equipotential
bonding, e.g., between shielded connections and require an additional tap for this
potential.
Pos: 18.15.35 /D okumentation allgemein/Gliederungselemente/---Sei tenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1