WAGO-I/O-System 750
Appendix 187
750-370 PROFINET IO Fieldbus Coupler
Manual
Version 2.0.0
14.2.8 Special AO Module Types with Parameter Channel (AO,
562, 563)
For standard modules equipped with a parameter channel, another parameter data
set is sent to the data set number or index 0x2000 or 8192.
Depending on the I/O module type (item number), the following additional
attributes can then be set during parameterization.
Table 145: Parameterization – Overview of Additional Attributes for Special AO Module Types
(AO, 562, 563)
Additional Attributes for Special AO Module Types with Parameter Channel
(AO, 562, 563)
User scaling (depending on module type)
-
Calibration (depending on module type)
-
Number notation (depending on module type)
-
Operating mode (depending on module type)
-
Limiting value overrange (depending on module type)
-
Output (depending on module type)
-
Behavior on internal data bus timeout (depending on module type)
-
Switch-on delay [s] (depending on module type)
Table 146: Parameterization AO, 562, 563 – “User Scaling” Attribute
Attribute name
Attribute value
Description
User scaling
The entries in the “User Offset” and “User Gain”
attributes are:
enabled
•
to calculate the value range.
disabled
•
to not calculate the value range.
Table 147: Parameterization AO, 562, 563 – “Calibration” Attribute
Attribute name
Attribute value
Description
Calibration
Users
See the respective manual for the 75x-562,
750-563 I/O modules
at: www.wago.com.
Manufacturer
Table 148: Parameterization AO, 562, 563 – “Number Notation” Attribute
Attribute name
Attribute value
Description
Display Mode
Two's complement
See the respective manual for the 75x-562,
750-563 I/O modules
at: www.wago.com.
Amount plus leading
sign
