WAGO-I/O-SYSTEM 750
Configuration and Parameterization 55
750-658 CAN Gateway
Manual
Version 1.2.1, valid from FW/HW-Version 01/01
The diagnostics and their meaning can be found in the table “Diagnostics“ in
Section “Diagnostics“.
9.1.3.2 Set Mailbox Length
Specify how large the mailbox should be (in bytes). Enter the corresponding
value in the "Length" input field.
Figure 23: Set Mailbox Length
Set the mailbox size in the "Sniffer" and "Transparent" operating modes
Set the mailbox in these operating modes to values between 2 and 6 bytes to
have the greatest possible data throughput.
Set the mailbox size in the "Mapped" operating mode
Set the mailbox in this operating mode to values between 2 and 6 bytes to
achieve the greatest possible data throughput to which CAN telegrams can be
mapped!
