WAGO-I/O-SYSTEM 758
Connect Devices
27
758-915
Bluetooth
®
ETHERNET Gateway
Manual
Version 1.1.0, applicable from FW/HW Version 01/01
5
Connect Devices
5.1
Connection
Before the device can be used, all cable connections must be established.
Ensure that wires are not live!
Power supply: Do not switch on the power supply until the device has been
properly connected.
LAN: Improperly routed ETHERNET cables can carry dangerous overvoltage.
Always ensure that these cables have been laid properly before connecting the
device to the network.
1.
Use a suitable cable, such as WAGO Item 756-1203/060-050, to connect the
WEG to your network or ETHERNET terminal.
2.
Use a suitable cable, such as WAGO Item 756-3101/040-020, to connect the
WEG to the external power supply unit.
Figure 13: Connecting the WEG