66
Appendix
WAGO-I/O-SYSTEM 758
758-915
Bluetooth
®
ETHERNET Gateway
Manual
Version 1.1.0, applicable from FW/HW Version 01/01
WEGs therefore implement the “Low Emission Mode
TM
” to minimize the adverse
effects of inquiry processes.
When you activate the setting “low emission mode” in the Web-based
Management System for “Bluetooth > WLAN coexistence”, the WEG will
reduce all device searches (Inquiry) to a minimum.
This ensures that disturbance of any WLAN transmission that is interfered with is
limited only to a very short period.
Implementation of the “Low Emission Mode
TM
” or similar mechanisms is a
prerequisite for production facilities of the German automotive industry, among
others, for authorization to operate a
Bluetooth
®
system.
Active “Low Emission Mode
TM
” can slow down roaming!
Use of the “Low Emission Mode
TM
” can result in not all detectable devices being
discovered immediately on an inquiry. It must therefore be anticipated that
switching to different access points will take more time than normal for roaming.