787-1226
Connection
30
Product manual | Version: 1.0.0
Compact Power Supply
The procedure for removal and connection is the same for both WAGO Pluggable Con-
nectors.
WAGO's
picoMAX
®
Pluggable Connectors consist of a male header (fixed in the product)
and a female connector (pluggable).
For more information on
picoMAX
®
, please visit “WAGO picoMAX® Pluggable Connec-
tion System” in the catalog or on the internet at www.wago.com.
5.1.2.1 Delivery Condition
When delivered, the female connectors are plugged into the product.
5.1.2.2 Pulling the Female Connector
WAGO recommends using a
picoMAX
®
unlocking tool (referred to in the following text as
the “unlocking tool”). More information on the unlocking tool is available in the Section
8
.
2
1
Figure 20: Removing the Female Connector without Wiring (Application Example)
1
3
Figure 21: Removing the Female Connector with Wiring (Application Example)
Table 29: Legend for “Removing the Female Connector …” Figures
Position
Description
1
Male locking latch
2
Protruding rim of the female connector
3
Unlocking tool
Removing the Female Connector without Wiring
Proceed as follows to remove the female connector with the unlocking tool:
1. Place the unlocking tool (3) onto the locking latch (1).
