28
Mounting
WAGO ETHERNET Accessories 852
852-111 5 Port 100BASE-TX Industrial ECO Switch
Manual
Version 1.1.0, valid from FW/HW Version 01/06
Figure 8: Mounting on carrier rail 1
Figure 9: Mounting on carrier rail 2
5.3
Screw fixing
The industrial ECO switch can be mounted vertically or horizontally directly on
an even surface using the boreholes on the side of the device.
The surface must be able to bear at least 1.5 kg for the industrial ECO switch.
Use the drilling template given in the appendix to mark the boreholes.