WAGO-ETHERNET-Accessories 852
Important Notes
9
852-111 5 Port 100BASE-TX Industrial Eco Switch
Manual
Version 1.0.0
Pos: 2.12 /Serie 852 (Ethernet-Zubehör)/Wichtige Erläuterungen/Sicherheitshinweise 852-111, 112 @ 4\mod_1236775145078_21.doc @ 28192
1.4 Safety
Information
DANGER
Warning of physical injury
Industrial Eco Switches are exposed operating equipment. They may only be
assembled in housings, cabinets or in electrical operation rooms. Access is only
permitted via a key or tool to authorized qualified personnel.
DANGER
Warning of physical injury
All power sources to the device must always be switched off before performing
any installation, repair or maintenance work.
NOTICE
Warning of damage to equipment
The components are not resistant against materials having seeping and insulating
properties such as: aerosols, silicones, triglycerides (found in some hand creams).
If it cannot be determined that these materials appear in the component
environment, then the components must be installed in an enclosure that is
resistant against the above mentioned materials. Clean tools and materials are
generally required to operate the device/module.
NOTICE
Warning of damage to equipment
Soiled contacts must be cleaned using oil-free compressed air or with ethyl
alcohol and leather cloths.
NOTICE
Warning of damage to equipment
Do not use contact sprays, which could possibly impair contact area functionality.
NOTICE
Warning of damage to equipment
Avoid reverse polarity of data and power lines as this may damage the devices.
NOTICE
Warning of damage to equipment by electrostatic discharge
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched.
Pos: 2.13 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Schriftkonventionen @ 3\mod_1221059521437_21.doc @ 21714
