10
6196 911 - 01
WAGO Gateway Installation and Service
Quick Start Guide WAGO BACnet/IP with MS/TP Router
(continued)
Installation
Configure the MS/TP router
Open Web browser to http://192.168.1.18
(admin / Vimaster99)
Note:
It is recommended to leave the default IP address
of 192.168.1.18 The Wago gateway and MS/TP
router need to be on the same IP subnet to
communicate with each other.
In the “Confguration” tab you can modify the MS/
TP (green) section to accommodate the BMS network
requirements.
WBM - IP Address and UDP Port (Optional)
Note:
It is recommended to not change the IP addresses
for the Wago gateway and the MS/TP router as they
both need to be on the same IP subnet to
communicate.
Open web browser to https://192.168.1.17/wbm (admin
/ wago) Navigate to Configuration / Networking / TCP/IP
Configuration
Change the IP address, hit Submit button (IP changes
immediately, change URL)
Optional:
H
Configuration / Users - Change passwords for wbm login
H
Configuration / Networking / Routing - (Default)
Gateway Address
H
Fieldbus / BACnet / Configuration - BACnet UDP Port