8 • The WAGO-I/O-SYSTEM 750
Installation
Modular I/O System
ETHERNET TCP/IP
Self-cleaning power jumper contacts conduct the supply voltage for the field
side. They are located on either side of the modules. The female contacts on
the right-hand side of the fieldbus coupler and the bus modules are designed as
spring contacts to protect against accidental contact. Male contacts are located
on the left-hand side of the bus modules.
Pos. 1
Pos. 2
Fig. 2-4:
Power Jumper Contacts
g01xx00d
Danger
The power contacts have sharp-edges. Handle the module carefully to prevent
injury.
Attention
Please take into consideration that some bus modules have no or only some
power jumper contacts. The design of some modules does not physically al-
low for assembling them in rows as the grooves for the male contacts are
closed at the top.
The data contacts are designed as self-cleaning gold spring contacts which
automatically produce a secure connection.
Fig. 2-5:
Data contacts
p0xxx07x
Warning
Do not connect the I/O module to gold spring contacts in order to avoid tar-
nishing or scratching!
