2787-2146 (/0000-00x0)
Configuration
58
Product manual | Version: 1.2.2
Power Supply Pro 2
10.3.3.2 Display Section: Measurement Recording
1
2
3
5
4
Figure 34: Display Section: “Measurement Recording”
This display section can represent the time series of up to three different measured val-
ues (measurement recordings).
You can make the following settings for each time series:
Table 63: Display Section: “Measurement Recording”
Pos.
Setting
Description
1
Chart/Clock
Here you can specify whether a specific number of val-
ues (
chart
) or measured values over a specific time
period (
clock
) should be recorded. The corresponding
input form changes accordingly:
•
Pos. 3 = input form for
chart
•
Pos. 4 = input form for
clock
2
Measured Value Selection
Here you can select the measured value to record.
3
Number of samples
Here you can enter the number of measured values to
record (setting at pos. 1 =
chart
).
Sample rate
Here you can enter the recording cycle for the mea-
sured values (unit: ms)
