22 Safety Information
Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
2.2
Special Use Conditions for ETHERNET Devices
If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
•
Do not connect control components and control networks to an open
network such as the Internet or an office network. WAGO recommends
putting control components and control networks behind a firewall.
•
In the control components (e.g., for WAGO I/-CHECK and CODESYS)
close all ports and services not required by your application to minimize the
risk of cyber attacks and to enhance cyber security.
Only open ports and services during commissioning and/or configuration.
•
Limit physical and electronic access to all automation components to
authorized personnel only.
•
Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
•
Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
•
Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
•
Use “defense-in-depth” mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Please note the risks of using cloud services!
If you use third-party cloud services, sensitive data is transferred to the cloud
service provider at one's own responsibility. External access may result in
manipulated data and/or unwanted control commands affecting the performance
of your control system.
Use encryption methods to protect your data and observe the information
provided by the Federal Office for Information Security – “Cloud: Risks and
Security Tips”.
Observe comparable publications of the competent, public institutions of your
country.
