background image

WAGO-I/O-SYSTEM 750 

Device Description 

25 

750-476 2AI ±10V DC S.E. 

 

 

Manual 

 

Version 1.1.0  

 

Pos: 60 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Zulassungen/Schiff/EinleitungssätzeZulassungen Busklemme 750-xxxx Schiff, ohne Variantenangabe - Einleitung @ 4\mod_1237190918453_21.docx @ 28420 @  @ 1 

 

The following ship approvals have been granted to 750-476 I/O modules: 

Pos: 61.1 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/ABS (American Bureau of Shipping) @ 3\mod_1224055151062_0.docx @ 24023 @  @ 1 

 

  ABS (American Bureau of Shipping) 

 

Pos: 61.2 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/BSH (Bundesamt für Seeschifffahrt und Hydrographie) @ 5\mod_1246341825156_21.docx @ 36334 @  @ 1 

 

 

Federal Maritime and Hydrographic Agency 

 

Pos: 61.3 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/BV (Bureau Veritas) @ 3\mod_1224492116171_0.docx @ 24220 @  @ 1 

 

 

BV (Bureau Veritas) 

 

Pos: 61.4 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/DNV (Det Norske Veritas) Class B @ 3\mod_1224492540562_0.docx @ 24224 @  @ 1 

 

 

DNV (Det Norske Veritas) 

Class B 

 

Pos: 61.5 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/GL (Germanischer Lloyd) Cat. A, B, C, D (EMC 1) @ 3\mod_1224492724484_0.docx @ 24228 @  @ 1 

 

 

GL (Germanischer Lloyd) 

Cat. A, B, C, D (EMC 1) 

 

Pos: 61.6 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/KR (Korean Register of Shipping) @ 3\mod_1224492806109_0.docx @ 24232 @  @ 1 

 

  KR (Korean Register of Shipping) 

 

Pos: 61.7 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/LR (Lloyd’s Register) Env. 1, 2, 3, 4 @ 3\mod_1224492890453_0.docx @ 24236 @  @ 1 

 

 

LR (Lloyd’s Register) 

Env. 1, 2, 3, 4 

 

Pos: 61.8 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/NKK (Nippon Kaiji Kyokai) @ 3\mod_1224493002656_0.docx @ 24240 @  @ 1 

 

 

NKK (Nippon Kaiji Kyokai) 

 

Pos: 61.9 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/PRS (Polski Rejestr Statków) @ 3\mod_1224497273250_0.docx @ 24295 @  @ 1 

 

 

PRS (Polski Rejestr Statków) 

 

Pos: 61.10 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Schiffszulassungen/RINA (Registro Italiano Navale) @ 3\mod_1224493078359_0.docx @ 24244 @  @ 1 

 

 

RINA (Registro Italiano Navale) 

 

Pos: 62 /Dokumentation allgemein/Gliederungselemente/------Leerzeile------ @ 3\mod_1224662755687_0.docx @ 24460 @  @ 1 

 

 

Pos: 63 /Alle Serien (Allgemeine Module)/Überschriften/Neue Überschriften/Ebene 2Normen und Richtlinien - Überschrift 2 @ 4\mod_1242804031875_21.docx @ 33646 @ 2 @ 1 

 

3.8 

Standards and Guidelines 

Pos: 64 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Normen und Richtlinien/EMV-Normen Busklemme 750-xxxx, ohne Variantenangabe - Einleitung @ 4\mod_1242803944015_21.docx @ 33642 @  @ 1 

 

750-476 I/O modules meet the following requirements on emission and immunity 

of interference: 

Pos: 65 /Alle Serien (Allgemeine Module)/Normen und Richtlinien/EMV-Normen - Standard/EMV CE-Störaussendung EN 61000-6-4 @ 4\mod_1242798273984_21.docx @ 33602 @  @ 1 

 

EMC CE-Emission of interference 

acc. to EN 61000-6-4 

Pos: 66 /Alle Serien (Allgemeine Module)/Normen und Richtlinien/EMV-Normen - Standard/EMV CE-Störfestigkeit EN 61000-6-2 @ 4\mod_1242797655625_21.docx @ 33591 @  @ 1 

 

EMC CE-Immunity to interference 

acc. to EN 61000-6-2 

Pos: 67 /Alle Serien (Allgemeine Module)/Normen und Richtlinien/EMV-Normen - Schiffbau/EMV Schiffbau-Störfestigkeit Germanischer Lloyd @ 4\mod_1242798409640_21.docx @ 33610 @  @ 1 

 

EMC marine applications-Immunity   

 

to interference   

 

 

acc. to Germanischer Lloyd 

Pos: 68 /Alle Serien (Allgemeine Module)/Normen und Richtlinien/EMV-Normen - Schiffbau/EMV Schiffbau-Störaussendung Germanischer Lloyd @ 4\mod_1242798400546_21.docx @ 33606 @  @ 1 

 

EMC marine applications-Emission 

 

 

of interference   

 

 

acc. to Germanischer Lloyd 

Pos: 69 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @  @ 1 

 

 

 

Summary of Contents for WAGO-I/O-SYSTEM 750-476

















































Reviews: