WAGO-TO-PASS® 761
Commissioning
29
761-510 GPRS Modem, RS-232
Manual
Version 1.0.2
Pos: 39 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Inbetriebnehmen - Konfigurieren - ParametrierenIn Betrieb nehmen - Überschrift 1 @ 4\mod_1240901452750_21.doc @ 31570 @ 1 @ 1
5 Commissioning
Pos: 40 /Serie 761 (TO-PASS)/Systemvoraussetzungen/Voraussetzungen 761-510 @ 5\mod_1245243777203_21.doc @ 35484 @ 2 @ 1
5.1
Conditions of Operation
To operate the
TO-PASS
®
modem GRPS RS-232, the following information must
be available and the following requirements be met:
Antenna
An antenna adjusted to the frequency bands
of the GSM network operator you have selected:
-
850
MHz,
-
900
MHz,
-
1800
MHz
or
-
1900
MHz.
Please
only
use
antenna
from
the
accessories for the
TO-PASS
®
modem GRPS
RS-232.
(see
"Information about Accessories ")
Power supply:
A power supply with a voltage
between 12VDC and 30VDC that can deliver
sufficient current.
(see
SIM card
A SIM card from the selected GSM-
network
operator.
PIN
The PIN of the SIM card
GPRS activation:
The SIM card must be activated by your GSM-
network
operator
for
the
GPRS
service.
The GPRS access data must
be known:
- Access Point Name (APN)
- User name
- Password
CSD 9600 bit/s activation:
The SIM card must be activated by your GSM-
network
operator
for
the
CSD
service
if
if you want to use remote configuration
via data selection connections.
(see Section " CSD Call Outgoing ".
Pos: 41 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1