52 Operation
WAGO-TO-PASS®
761
761-510 GPRS Modem, RS-232
Manual
Version 1.0.2
Table 33: Enter PIN
AT+CPIN
Enter PIN
Test
Command
AT+CPIN=?
Response OK
Query
Command
AT+CPIN?
ReCPIN:
<code>
Effective command
Command
AT+CPIN=<pin> [,<newpin>]
Response OK
Parameter <code>:
READY:
Device expects no password entry.
SIM PIN:
Device is waiting for the PIN entry.
SIM PUK:
Device is waiting for the PUK entry.
A second PIN <newpin> can also be used
to replace the old PIN of the SIM and
can be entered accordingly.
SIM PIN2:
Device is waiting for the PIN2 entry of the
SIM. (It is recommended that this code <code> only
be returned if the last output command lead to
a PIN2 authentication error
(e.g., +CME ERROR: 17);
it is recommended that the device does not block
the operation if the PIN2 is not entered correctly
after this error.)
SIM PUK2: Device is waiting for the PUK2 entry of the
SIM. (It is recommended that this code <code>
be returned if the last output command lead to a
PUK2
authentication
error
(e.g., +CME ERROR: 18);
it is recommended that the device does not block
the operation if the PUK2 and the new PIN2 are
not
entered
correctly
after this error.) A second
PIN <newpin> can also be used that replaces the
old PIN in the SIM and should be provided
accordingly.
PH-NET PIN: Devices is waiting for the password entry.
String variable (8 characters max.)
Note -
