38 Commissioning
WAGO
WINSTA®
770
770-629/130-000 WINSTA® Sunblind Box 4 Channel
Manual
Version 1.1.1, valid from HW/FW version XXXX0201XX
7.4.3.4
Three Groups: Motors 1 and 2 Move Individually, Motors 3 and 4
Move Simultaneously
To form three groups, Group A in which motor 1, Group B in which motor 2, and
Group C in which motors 3 and 4 move together, make the following settings:
Table 20: Three groups: motors 1 and 2 move individually, motors 3 and 4 move simultaneously
Assignment of motors - local push buttons
Motor
1 2 3 4
ON
DIP
1 2 3
4 5 6
ON
DIP
1 2 3
4 5 6
Figure 23: Three groups: motors
1 and 2 move individually,
motors 3 and 4 move
simultaneously
Push
button
S1 S2 S3 S3
7.4.3.5
Four Groups: All Motors Move Individually
In order to have each connected motor move individually, make the following
settings:
Table 21: Four groups: all motors move individually
Assignment of motors - local push buttons
Motor
1 2 3 4
ON
DIP
1 2 3
4 5 6
ON
DIP
1 2 3
4 5 6
Figure 24: Four groups: all
motors move individually
Push
button
S1 S2 S3 S4
Factory setting
This is the factory setting for the grouping.