14
DE
GB NL FR
Technical specifications
5L non-pressure boiler
OTS 5
UTS 5
Model Wahlbach
Over-sink
Under-sink
Wall mounting
Vertical
Vertical
Construction
Open
Open
Material Anschluss
Brass
Brass
Distance, pipe to wall
92mm
92mm
Electric supply
230V, 50Hz
230V, 50Hz
Nominal capacity
2,0kW
2,0kW
Nominal volume
5,3L
5,3L
Total quantity of mixed water
9,1L
9,1L
Temperature range
35 - 75°C
35 - 75°C
Cable size
1,0mm²
1,0mm²
Maximum recommended water volume
5,0L/min
5,0L/min
Non-usage consumption/ day
0,32kWh
0,32kWh
Protection class
I
I
IP rating
IP24
IP24
Dimensions (h x w x d)
274x185x421 mm
274x185x421 mm
Weight when empty
2,5kg
2,5kg
Water connection
G½”
G⅜”
Operating pressure
0MPa
0MPa
3.
USER INSTRUCTIONS
The device must be filled with water before connec
-
tion to the electrical supply!
When powering up for the first time, you must verify that
the temperature indicator (light) extinguishes when the re-
quired temperature is reached (the device has reached the
set temperature). The device only switches on again if the
temperature falls below this setting. (See troubleshooting)
When filling for the first time, the hot water valve in the low-pressure tap fitting must be
open so that water can flow into the device. If the device is not filled with water before
-
hand during installation, the automatic safety device will activate and switch off the ap-
pliance. (See troubleshooting instructions on how to act in the event of a fault.)
