10
E N G L I S H
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
Plug-in transformer
Manufacturer:
Ten Pao Industrial Co., Ltd.
Room 10-11,6/F., Kwong Sang Hong
Centre, 151-153 Hoi Bun Road, Kwun
Tong, Kowloon, Hong Kong
Type
Adapter 6000
Euro plug
Input voltage:
100 – 240 V
Input AC frequency:
50/60 Hz
Output voltage:
5.9 V
Output current:
1.5 A
Output power:
8.85 W
Average active efficiency:
79.3 %
No-load power consumption: 0.04 W
Type
Adapter 6000
UK plug
Input voltage:
100 – 240 V
Input AC frequency:
50/60 Hz
Output voltage:
5.9 V
Output current:
1.5 A
Output power:
8.85 W
Average active efficiency:
79.1 %
No-load power consumption: 0.04 W
Manufacturer:
GOLD MARK (CHINA) HOLDINGS LTD
Unit 1706,17/F.,Vanta Industrial Centre,
21-33 Tai Lin Pai Road,Kwai Chung, N.T.,
Hong Kong
Type
Adapter 6000 A (VI)
Euro/UK plug
Input voltage:
100 – 240 V
Input AC frequency:
50/60 Hz
Output voltage:
5.9 V
Output current:
1.5 A
Output power:
8.85 W
Average active efficiency:
79.7 %
No-load power consumption: 0.04 W
Operating conditions
Ambient temperature:
0°C - +40°C
The appliance is safety insulated and radio screened. It meets the
requirements of EU Electromagnetic Compatibility Directive 2014/30/EC
and Machinery Directive 2006/42/EC.
Operation
Cutting with attachment comb
The appliance can also be operated with an attachment comb.
f
The attachment comb has 5 detent positions for adjusting the cut-
ting length.
f
The further the attachment comb is pushed onto the blade set, the
shorter the cutting length.
The cutting length can be adjusted from 3 mm (Fig. 5
ⓐ
) to
6 mm (Fig. 5
ⓑ
).
Operation
Preparation
Keep the packaging material for safe storage or transport
later.
f
Check that the contents are complete.
f
Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f
Only operate the appliance with the voltage stated on
the nameplate.
Charging the battery
1. Connect the appliance plug on the plug-in transformer to the
charging stand socket (Fig. 2
ⓐ
).
Battery overcharging is prevented thanks to intelligent
charge management.
2. Connect the plug-in transformer to the mains socket (Fig. 2
ⓑ
).
3. Switch off the appliance using the on/off switch (Fig. 3
ⓑ
).
4. Place the appliance in the charging stand (Fig. 2 ).
·
During charging, the charging indicator flashes at evenly
spaced intervals.
·
After the appliance has been removed from the charging
stand, the display goes out (power saving mode).
5. As soon as the battery is fully charged, the charging indicator
flashes at a different rate (10 on / 1 off).
Battery operation
1. Switch on the appliance using the on/off switch, and switch off
after use (Fig. 3
ⓐ
/
ⓑ
).
In case of insufficient maintenance of the blade set, the
operating time can be reduced considerably.
Summary of Contents for 1591 Q
