Academy dryer instructions
11
PRODUCT REGISTRATION
Wahl are constantly developing and launching new products in the UK. We would like to
understand your product needs and expectations and we value any comments you may
have. As part of Wahl Customer Care, we are offering you the chance to be kept up to
date with the latest product launches, innovations and special offers.
Please take a minute to register your product online at
www.wahl.co.uk
WIRING
The wires in the mains lead of this Hairdryer are coloured in accordance to the
following code:
Blue Neutral (N)
Brown live (L)
This appliance is fitted with a 3 pin plug which has a 13 amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes damaged, it should
be cut off and disposed of, and a suitable plug fitted as detailed below.
As the colours of the wires in the mains lead of this Hairdryer may not correspond
with the colour markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the plug
which is marked with the letter ‘N’ or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal in the plug
which is marked with the letter ‘L’ or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked with the
letter ‘E’ or has the Earth symbol, or coloured GREEN or GREEN/YELLOW.
Replacement fuses should be approved to BS 1362 Fuse cover must be refitted
when changing the fuse. If the fuse cover is lost the plug must not be used until
a replacement is obtained. Information for obtaining the correct fuse is marked
on the carrier itself and in the bottom of the fuse cavity in the plug. These may be
obtained from Wahl (UK) Ltd.
