background image

15

Deluxe Chrome Pro Clipper

back into the motor.

CLEANING AND STORAGE

Before storing your trimmer, use the cleaning brush to whisk any loose 
hairs from the units and blades. Store unit in a manner so that the blades 
are protected from damage. 

WAHL NASAL TRIMMER
OPERATING INSTRUCTIONS

Battery Installation/Replacement:

1.  Holding the trimmer with the cutting head facing you, place your thumb  
  on the arrow moulded into the battery compartment cover, press lightly  
  and slide the cover downward to remove it.
2.  Insert one AA battery, (included) positive end first (towards the cutting  
 head)
3.  Replace the battery compartment cover.
4.  To maximise the battery life, turn the trimmer “Off” immediately.
5.  Replace the battery as soon as you notice the trimmer running slower  
  than normal, to avoid pulling hairs.

Trimming Hair From Nose.

1.  Makes sure nasal passages are clean
2.  Slowly move rotary head in and out of each nostril, no more than 1/4  
  inches deep. Keep the side of the cutting head firmly against the skin to  
  prevent a tickling sensation

Trimming Hair From Ears
1.  Make sure the outer areas do not contain any wax.
2.  Hold the ear flat with one hand and carefully insert rotary head no more  
  than 1/4 inches into the outer ear.

     WARNING

: DO NOT INSERT THE ROTARY HEAD OR ANY OTHER 

FOREIGN OBJECT INTO THE INNER EAR. FOR HAIR GROWING ON THE 
OUTSIDE OF THE EAR, SIMPLY MOVE THE ROTARY HEAD SLOWLY 
ALONG THE EDGES OF THE EAR.

Summary of Contents for Deluxe Chrome Pro















Reviews: