5
James Martin Table Blender
11.Never carry the unit by its power cord.
12.Use this appliance only for its intended purpose.
INSTALLATION
1. Remove all packaging and clean the jug, measuring cup and lid
thoroughly before using for the first time. Only clean the main unit with
a damp cloth. Never immerse the unit in water or place under running
water. See cleaning & storage section page 8 for full cleaning
instructions.
The blender should be placed on flat surface before operation.
WARNING:
THE BLADE IS VERY SHARP. WASH WITH CARE AND
NEVER TOUCH THE BLADE WITH YOUR FINGERS.
2. Do not plug in the appliance before assembling.
3. Place the appliance on a flat surface.
4. Place the glass jug on to the motor unit and lock into place by turning
clockwise.
5. Put the lid on top of the jug and push it down. Insert the measuring cup
into the cover and turn until it locks into place.
6. Make sure the appliance is turned off before plugging in.
HOW TO USE
1. Before plugging in ensure that the mains voltage matches that shown
on the rating label.
2. This unit has a safety design, it will not work if the jug is not installed
onto the main body properly.
3. Turn the control dial to position 0 in order to make sure the unit is
turned off.
4. Place ingredients into the jug, do not exceed the maximum 1.5L
capacity.
IMPORTANT:
Do not operate with out any ingredients.
5. Put the cover on top of the jug ensuring it is fitted correctly.
6. Turn the control dial clockwise to your desired speed as you need, or
use the pulse function by turning the dial anti-clockwise.
IMPORTANT:
Do not open the lid while the blender is working.