Powerpik 2 hairdryer
12
WIRING INSTRUCTIONS
WARNING: IF THE SUPPLY CORD IS DAMAGED IT
MUST BE REPLACED BY THE MANUFACTURERS
SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON
IN ORDER TO AVOID A HAZARD.
The wires in the mains lead of this Hairdryer are coloured in
accordance to the following code:
Blue Neutral (N)
Brown Live (L)
This appliance is fitted with a 3 pin plug which has a 13amp
fuse fitted.
If the plug supplied is not suitable for your socket or becomes
damaged, it should be cut off and disposed of, and a suitable
plug fitted as detailed below.
As the colours of the wires in the mains lead of this Hairdryer
may not correspond with the colour markings identifying the
terminals in your plug, proceed as follows.
The wire which is coloured BLUE must be connected to the
terminal in the plug which is marked be with the letter ‘N’ or
coloured BLACK OR BLUE.
The wire which is coloured BROWN must be connected to
the terminal in the plug which is marked with the letter ‘L’ or
coloured RED OR BROWN.
DO NOT connect either wire to the terminal in the plug which
is marked with the letter ‘E’, has the Earth symbol, or coloured
GREEN OR GREEN AND YELLOW
Summary of Contents for Powerpik 2
Page 1: ...Powerpik 2 hairdryer instructions ...
Page 15: ...Powerpik 2 hairdryer 15 ...
