320.805.004
11
Date: 2022-02-09
WARNING! Rea
2 before installing, powering, operating, or
servicing the product.
WARNING! Only experienced users should operate the product. Contact Wahlberg Motion
Design for further information and education on motion equipment.
WARNING! Make sure the object is secured on the platform and that the weight is within the
limit, centered and does not make the platform unstable during acceleration and
deacceleration.
WARNING! Mounting screws and bolts through the platform shall be kept away from the drive
and castor wheels.
Mounting the load
The standard products will have mounting holes along each side of the platform [
A
] and minimum
one screw at each corner or side is recommended. The screws for drive motors, castor wheels and
battery pack [
B
] should not be unscrewed.
The object on the platform must be centered and within the weight limitation for each variant as
specified, also considerations for a low center of gravity will be needed depending on the shape
and dimensions of the object.
A
B
Do not unscrew!
8mm (0.31 in)
bolt or screw
through 4mm
(0.16 in) steel
Maximum load (see
technical specifications)
and secure a low center
of gravity
The object should
not exceed the size
of the platform
