background image

320.805.004 

7

 

Date: 2022-02-09 

Area of use 

WARNING! When running the platform, the surface must be hard and flat. 
WARNING! To reduce the risk of electric shock or injury: use charger indoors only 
WARNING! To reduce the risk of electric shock, do not expose charger to rain: store indoors! 

The  platform  itself  is  intended  for  indoor  and  partly  outdoor  use.  It  is  designed  to  move 

stenographic elements, actors or Musicians on the stage at the speed stated in "Technical Data". 

Any other use of the product may result in a risk of injury of persons or equipment damage. 
Exceeding the load rating may cause failure of the equipment. 

Do  not  modify  the  product.  For  any  modification  of  your  product,  contact  Wahlberg  Motion 

Design. 
It is the customers' responsibility that any local restrictions concerning the use of the product are 

fulfilled. 
 

Using for the first time 

Important! The product must be protected from environmental factors such as physical shocks 

and vibration during transportation and storage. 

 

WARNING

2  before  installing,  powering,  operating,  or 

servicing the product. Before applying power to product: 

 

Check  the  Wahlberg  Motion  Design  website  at 

www.wahlberg.dk

  for  the  most  recent 

documentation  and  technical  information  about  the  Remote-Controlled  Platform.  Wahlberg 

Motion Design user manual revisions are identified by the revision number in the bottom of 
each page. 

 

2. 

 

Check that the local AC mains power source is within the rated power voltage and frequency 

ranges for the chargers. 

 

Transport 

Important! The product must be protected from environmental factors such as physical shocks 

and vibration during transportation. 

 

Use  only  the  original  packaging,  flight  case,  or  pallet  frame  for  protecting  the  product  during 
transport. Contact Wahlberg Motion Design for enquiries regarding flight cases or pallet frames. 

 

Summary of Contents for 320.702





















Reviews: