7
246.805.201
Date: 2017-09-26
Introduction
Thank you for selecting the Winch 50, a DMX controlled winch from Wahlberg Motion
Design. Before using the winch for the first time, please read this manual carefully.
Failure in handling can cause injury of persons and/or damage the winch.
Package content
1 ×
Winch 50
1 ×
PowerCon NAC3FX-W female plug for power cable
1 ×
PowerCon NAC3FX-W female plug for lifting wire power
1 ×
Instruction manual
1 ×
Cheat Sheet
Description
Winch 50 is a wire winch for stage use, mainly for use in theatres, shows and concerts.
It lifts props and small set pieces in and out of the stage sphere at maximum load of 50
kg up and down. The lifting height is 40 m. Contact Wahlberg Motion Design for
extending your lifting height. The lifting speed is between 9 cm/s and 45 cm/s.
The winches are easily connected as a chain, allowing for advanced and creative ways
of making dynamic
The control system ensures that the motor only is powered when:
•
The control signal is reliable.
•
The position and speed control is on.
•
The motor position is calculated after witch a PID regulator calculates the
motor speed and distance.
•
No overload.
Winch 50 should only be operated by an experienced DMX-controlled-lighting-desk-
operator.
The lighting desk has to be programmed according to the manual, so the winch will
stop when the speed is put to 0 %. It is also possible for the user to stop the winch on
the main. After power failure the start position of the winch needs to be reset before
the winch can function again.
Manually operation of the winch is only intended for mounting, service, and tests.
Summary of Contents for Winch 50 Double
Page 12: ...12 246 805 201 Date 2017 09 26...
