MANIAc bAR: 5Th LINE sETUP
20 - MANIAc MANUAL
5TH LINE SETUP
Although the ManiaC was designed on four lines and
performs optimally on this 4-line setup in the correct
rider weight and wind range , the 5th line setup allows
for increased wind range and additional stability of
the ManiaC in overpowered conditions. Be sure to test
the tension on the 5th line (after you have added the
v-line to kite) once you have made the conversion.
Launch the kite after conversion and sheet the bar
in. The 5th line should not have too much tension on
the line when sheeting in, nor have too little. It is the
riders responsibility to determine the correct amount
of tension required for optimal performance.
5th line setup can be purchased from your local
dealer to complement your ManiaC.
Remove the safety ring from the
bungee line.
Pull the bungee through the PU
tube towards the swivel.
2.
Remove the front line (orange) swivel
connector from swivel and the bungee
from the front line. Find additional
connector in ManiaC accessory bag.
3.
HOW TO:
REQUIRED PARTS (found in ManiaC 5th line kit):
5th line + 5th line extension
5th line adaptor
Safety stopper (found in ManiaC accesory bag)
5th line 2m extension
1.
A
B
C
B
C
D
A
A
B
D
