Item
Safety Instructions
Specifications
Item number
10030930
10030931
Power supply
220-250 V~
Power
30 W
60 W
Length
6 m
12 m
Insulation and IP class
•
The appliance is resistant to acid.
• Insulation: Heavy duty seal in the end and middle connector consists of XLPE (1mm).
•
The surface material is 1,5mm PVC. The connections and the end piece comply with
IP44.
•
The heating element is made of a copper-nickel alloy.
Range of application
• Heating cable for seedlings and greenhouses.
•
The bottom heat promotes faster germination and growth.
•
Includes 2m unheated cable with plug.
Intended use
: The cable is exclusively for heating plants in plant boxes, terrariums and
plants outside. Other applications such as using the wire to create a heating blanket are
prohibited.
•
Connect the cable only to the rated voltage.
• Do not cut the cable under any circumstances.
• Do not remove the isolation. It must not be damaged.
•
The propagator should be placed in a bright position i.e. a windowsill, because the
light influences plant growth, too.
• Heating cable should not be cut or creased.
•
Do not use the heating cable when it is broken, damaged or porous
•
The heating cable is not a toy – please keep it away from children.
•
Do not operate the heating in cable when it is coiled.
• Do not operate in extreme frost.
5
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure
caused by ignoring the mentioned items and cautions mentioned in the operation and instal-
lation instructions are not covered by our warranty and any liability.
