500.0023-A
8
Subject to technical changes
9.
With the door open, move the rotary opening handle counterclockwise into the
"closed" position (lock closes automatically).
10.
Enter the newly programmed code and open the lock again by moving the rotary
opening handle clockwise.
11.
If the test opening works, this guarantees that the new code has been saved and the
door can be closed.
NOTE:
If errors occur while making the change, the old code remains valid. You must start
the programming procedure from the beginning again.
3.4.2.
Master code 1
RECOMMENDATION:
Use the same code for the master code and user code 01 (OCa1),
or leave the master code on the factory setting (11998877). The safe cannot be opened
with the master code on its own!
Procedure:
1.
Open the door with the current codes.
2.
Leave the rotary opening handle in the "open" position.
3.
On the input unit, press the ENTER key; confirm the "Code functions" menu that is
shown on the display by pressing the ENTER key again.
4.
Use any arrow key to select "00 MA1" and confirm with the ENTER key; the display
shows "Change".
5.
Confirm this with the ENTER key and enter the existing lock code (MA1) (when you
reprogramme for the first time, this is 11998877), and confirm with the ENTER key.
6.
Then enter the new code (8 digits) and confirm again with the ENTER key.
7.
Enter the new code again to confirm it, and press the ENTER key to complete the
confirmation. The display shows: "Code saved".
3.5.
Setting the date and time
1.
With the door open and the rotary opening handle in the "open" position, press the
ENTER key; use any arrow key to select the "Time functions" menu, and confirm with
the ENTER key.
2.
On the display, confirm the "Lock 1" menu with the ENTER key.
3.
Enter master code MA1 and confirm with the ENTER key.
4.
The display shows the "Date/time" menu, which you must confirm with the ENTER key.
5.
Use the numeric keys to enter the date and time, and confirm with the ENTER key. The
date and time are then saved.
