500.0023-A
4
Subject to technical changes
5.
Carefully re-insert the battery case and
swivel it upwards into the housing of the
input unit until the battery housing clicks
into place.
As soon as the input unit is supplied with
power, the display shows one of these
messages:
"Battery case was open,
battery inserted" or "Battery case was
open, rechargeable battery pack
inserted".
6.
To delete the battery message, you must
first press the ENTER key and then enter
the master code (MA1) or the battery
code (11111111). The lock can then be
used again in the normal way.
7.
Press the ENTER key and the display will
show the
"Date, time saved" message.
8.
Press the ENTER key repeatedly, and the
display will show the
"Open menu"
message; confirm this again with the
ENTER key.
9.
The display
shows the "Lock code"
message to indicate that
user code 1
or 2 (11223310 or 11223320) must be
entered.
If the code was entered
correctly, the display shows the
"Lock is
opening" message, followed by "Lock
is open, open the bolt".
The rotary
opening handle can only be moved
clockwise after the second message.
10.
Open the door (display shows
"Released").
11.
Programme the new code as per section
3.4.
1
2
1
2
