500.0023-A
5
Subject to technical changes
Operation
3.1.
Opening the safe
1.
First, press the rotary opening handle
counterclockwise into the "closed"
position to make sure that the lock bolt is
relieved of pressure.
2.
Press the ENTER key and the display will
show the
"Date, time saved" message.
3.
Press the ENTER key repeatedly, and the
display will show the
"Open menu"
message; confirm this again with the
ENTER key.
4.
The display
shows the "Lock code"
message to indicate that
factory code
1 or 2 (11223310 or 11223320) must be
entered.
If the code was entered
correctly, the display shows the
"Lock is
opening" message, followed by "Lock
is open, open the bolt".
The rotary
opening handle can only be moved
clockwise after the second message.
5.
Open the door (display shows
"Released").
NOTE:
Every keystroke is acknowledged by an acoustic signal. If the interval between two
numeric inputs is more than 25 seconds, the display switches off and you must input the
entire code from the beginning again. If you make an incorrect entry, you can delete the
entire code with the CLR key and re-enter your code.
