500.0027-A
2
Subject to technical changes
Starting to use your safe interior
As soon as the safe interior, base or compartment block has been delivered and correctly
installed, you can start operating the lock.
To do so, please keep to the following procedure:
1.
Using the lug positioned on the left of
the battery cover, carefully push the
battery cover to the right, out of the
input unit housing.
2.
Connect the 9V ALKALINE block
battery to the cable located in the
housing of the input unit, and push
the battery into the housing from the
right.
Push the cable above the battery into
the housing.
3.
Carefully push the battery cover into
the input unit housing again, towards
the left.
4.
Enter the factory user code (1-1-1-1)
and turn the rotary opening handle
clockwise by 90° to reach the end
position.
5.
Open the door.
6.
Programme the new code as per
section 3.3.
Avoid jamming the cable!
Lug
