30
Instructions For Use Wall Mounted Uplighter DUW 2xx(D)
"ATARO"
ENG
Mounting part 1 - Preparation
Before mounting
Check the delivery for complete-
ness:
- Light head
- Fastening rail
- Lamps
- Included components
Note!
The foam parts in the light head
protect the lamp during transport.
They must be removed before
mounting.
Remove the lamp cover for it by
lifting it in its centre.
! WARNING
Warning against the light falling
down!
When mounted incorrectly, the
light may fall down.
¾
Mounting with suitable screws
and dowels only!
¾
Mounting to a surface suitable
for mounting only!
¾
Mounting by a skilled electri-
cian only!
Mounting of the fastening
rail
a) Loosen the two screws at the
underside of the light head.
b) Remove the fastening rail.
c) Mount the fastening rail with
2 or 3 screws and the required
number of dowels to the wall
(see hole pattern in the Appen-
dix).