22
Mounting
Fig. 12
GB
Instructions For Use Machine Light MCAYL 3 S
„SPOT LED 003“
! CAUTION
Danger due to insufficient
fastening!
When mounted incorrectly, the
light may fall down.
Mount light [2.1] using the enc-
¾
losed nut [2.2] and washer [2.4]
(see Fig. 2 on page 3).
Mounting to a surface suitable
¾
for mounting only!
Mounting by a skilled electrician
¾
only!
General
The light has been designed as
stationary light.
Both light and operating unit must
be mounted stationary.
CAUTION
Damage to the light caused by
improper cable layout!
If the cable is laid incorrectly, it
may be damaged due to outside
influences (e.g. hot chips).
Make sure that the cable is laid
¾
in such a way that it cannot be
damaged!
Caution
Decrease in the useful life
In the case of insufficientheat dis-
sipation, the useful life of the light
will decrease!
Operate light only when mount-
¾
ed!
Provide a sufficiently large
¾
metallic mounting surface (>
900 cm²).
Ensure good heat transfer
¾
between light and mounting
surface!
