15
Cleaning and Maintenance
Weekly Cleaning
NOTE:
If chargrill usage is very high, we recommend weekly cleaning is carried out more
frequently.
Ensure protective gloves are worn during cleaning.
DO NOT use harsh abrasive detergents, strong solvents or caustic detergents as they
will damage chargrill and burners.
DO NOT use water on griddle plates while they are still hot as warping may occur.
Allow these items to cool and then remove for cleaning.
Grates (Cast Iron)
a. Clean grates thoroughly with a wire brush or a flexible spatula.
b. A scraper tool can be used to remove stubborn carbon and
deposits.
c. Clean with hot water, a recommended detergent solution and a
scrubbing brush. Dry all components thoroughly with a dry
cloth.
d. Switch the chargrill ‘On’ briefly to ensure grates become dry.
Spread a thin film of cooking oil over grates to form a
protective film.
Radiants (Cast Iron)
a. Clean radiants thoroughly with a wire brush or a flexible
spatula.
b. A scraper tool can be used to remove stubborn carbon and
deposits.
c. Clean with hot water, a mild detergent solution and a scrubbing
brush. Dry all radiants thoroughly with a dry cloth.
Griddle Plate (Optional Extra)
a. Remove and clean grease collection drawer frequently to prevent over spills.
b. Clean griddle surface thoroughly with a scraper tool or wire brush. If necessary use a griddle
stone or a scotch bright pad on griddle surface to remove stubborn or accumulated carbon
deposits.
c. Occasionally bleach griddle plate with vinegar when plate is cold.
d. Clean with hot water, a mild detergent solution and a scrubbing brush. Dry all components
thoroughly with a dry cloth.
NOTE: To prevent rust forming on the griddle plate, ensure all detergent and cleaning
material has been entirely removed after each cleaning process. Switch the chargrill
‘On’ briefly to ensure grates are dry. Spread a thin film of cooking oil over grates to
form a protective greasy film.
Fig 8
Grates
Radiants
Main Burners
If the Chargrill is fitted with a griddle plate, if using a scraper tool to clean the
griddle plate, always apply even pressure over the whole surface of the scraper
tool, to prevent scoring of griddle plate surface.
NEVER bang the sharp edge of the scraper tool on the flat surface of the griddle
plate as this will damage the griddle plate and invalidate the warranty.
Caution
Summary of Contents for CH8300G
Page 24: ......