17
Operation
Press Timer 1, 2 or 3 as required.
LED beneath timer will flash continuously.
On completion of frying, beeper will sound
and display will show which timer has
completed frying.
Left Centre
or
Right
Press Timer Key to cancel Beeper and Timer
Press Temperature Key.
Display shows Actual Temperature.
To Use the Timers
To Use the Temperature Display
Turning ‘OFF’ the Fryer
To ‘Pilot’ Position
a. Depress and rotate gas control valve clockwise to the
Pilot
position.
b. Main burners will extinguish and
Pilot
will remain alight.
To ‘Off’ Position
a. Depress and rotate gas control valve fully clockwise to the
Off
position.
b. The
Pilot
burners will extinguish.
IMPORTANT:
Should any abnormal operation like;
- ignition problems,
- abnormal burner flame,
- burner control problems,
- partial or full loss of burner flame in normal operation,
If any of the above problems are noticed, the appliance requires IMMEDIATE service by a qualified
service person and should not be used until a service is carried out.
Press Temperature Key again,
within 3 seconds.
Display shows Set Temperature.
Display will count down time to
completion of frying.
NOTE: Refer to ‘Basic Programming Mode’ for
information on how to set the Timer
Pre-Set times.
NOTE: Refer to ‘Basic Programming Mode’ for
information on how to set the Cooking
Temperature.
Summary of Contents for FN8120GE
Page 37: ......
