4
Specifications
Model Numbers Covered in this Specification
FN
[1]
8120GE
‘FAST FRI’ GAS FRYER
(Single Tank - 20Ltr).
FN
[1]
8226GE
‘FAST FRI’ GAS FRYER
(Twin Tank - 26Ltr per Tank).
FN
[1]
8130GE
‘FAST FRI’ GAS FRYER
(Single Tank - 31Ltr).
NOTE:
[1]: - Back Options;
-
- Standard Models.
L
- Low Back Models.
Gas Supply Requirements
- Non CE Only (Australia / New Zealand):
- CE Only:
NOTE: Measure burner operating pressure at Lower Test Point (Out) on gas control valve, with
both burners operating at the 'High Flame' setting.
Electrical Supply Requirements
220 -240Vac, 1P+N+E, 50Hz, 0.5A.
Electrical Connection
The power cord comes fitted with:
Australia / NZ models -
10A 3-pin plug.
United Kingdom models -
13A 3-pin fused plug.
Natural Gas
LP Gas (Propane)
Input Rating
90MJ/hr
90MJ/hr
(N.H.G.C.)
(85,300Btu/hr)
(85,300Btu/hr)
Supply Pressure
1.13 - 2.00kPa
2.75 - 3.00kPa
(4.5” - 8.0” w.c.)
(11” - 12” w.c.)
0.98kPa
2.50kPa
(3.9” w.c.)
(10.0” w.c.)
Gas Connection
¾” BSP Male
Operating Pressure
Natural Gas (G20)
Propane (G31)
Heat Input (nett)
22.5kW
22.5kW
Gas Rate
1.75kg/hr
Supply Pressure
20mbar
37mbar
Burner Operating Pressure
9.8mbar
25mbar
Gas Connection
3
/
4
” BSP Male
2.26m
3
/hr
T
HIS
APPLIANCE
MUST
BE
EARTHED
. I
F
SUPPLY
CORD
IS
DAMAGED
,
IT
MUST
BE
REPLACED
BY
A
SUITABLY
QUALIFIED
PERSON
IN
ORDER
TO
AVOID
A
HAZARD
.
Warning
Summary of Contents for FN8120GE
Page 37: ......
