background image

Specifications

 

Model Numbers Covered in this Specification 

 

GP[1]8450G - B 

 

Gas Griddle 450mm wide Bench Model. 

GP[1]8450G - CB   

Gas Griddle 450mm wide with Cabinet Base. 

GP[1]8450G - LS  

Gas Griddle 450mm wide on Leg Stand. 

 

GP[1]8600G - B 

 

Gas Griddle 600mm wide Bench Model. 

GP[1]8600G - CB   

Gas Griddle 600mm wide with Cabinet Base. 

GP[1]8600G - LS  

Gas Griddle 600mm wide on Leg Stand. 

 

GP[1]8900G - B 

 

Gas Griddle 900mm wide Bench Model. 

GP[1]8900G - CB   

Gas Griddle 900mm wide with Cabinet Base. 

GP[1]8900G - LS  

Gas Griddle 900mm wide on Leg Stand. 

GP[1]8900G - RB   

Gas Griddle 900mm wide with Refrigerated Base. 

 

GP[1]8120G - B 

 

Gas Griddle 1200mm wide Bench Model. 

GP[1]8120G - CB   

Gas Griddle 1200mm wide with Cabinet Base. 

GP[1]8120G - LS  

Gas Griddle 1200mm wide on Leg Stand. 

GP[1]8120G - RB   

Gas Griddle 1200mm wide with Refrigerated Base. 

 

 
NOTE:

 

 

 

[1]: -  Back Options; 

 

 

- Standard Models. 

 

 

 

- Low Back Models. 

 

 

General 

A commercial heavy duty, fully modular, gas fired griddle using a thermostatic burner system and 

fitted with aluminised steel burners with full pilot and flame failure protection and piezo ignition. 

It uses a 20mm thick griddle plate with the option of either ribbed or chromed mirror plate options. 

 

All UK models and optional Non UK models are fitted with an overtemp device which isolates the gas 

supply to burners should gas control system or thermostat malfunction, thus preventing overheating 
of the griddle. 

 
The Griddle is constructed as a hob unit and is available in 4 options, on Leg Stand (-LS), Bench 

Mount (-B), Cabinet Base (-CB) or with Refrigerated Base (RB) models (Available for GP8900G and 

GP8120G Models only). 

 

Summary of Contents for GP8450G































Reviews: