background image

Specifications

 

Model Numbers Covered in this Specification 

GP

[1]

8910GE  Gas Griddle Range Static Electric Oven  

- 900mm. 

GP

[1]

8910GEC  Gas Griddle Range Convection Electric Oven  

- 900mm. 

GP

[1]

8121GE  Gas Griddle Range Static Electric Oven  

- 1200mm. 

GP

[1]

8121GEC  Gas Griddle Range Convection Electric Oven  

- 1200mm. 

 

NOTE: 
 

 

[1]: -  Back Options; 

 

 

- Standard Models. 

 

 

 

- Low Back Models. 

 

 

General 

A commercial heavy duty, fully modular, gas fired griddle / electric oven range using a thermostatic 
burner system on the griddle and fitted with 3 bar even heat aluminised steel burners with full pilot 

and flame failure protection and piezo ignition to each burner. 

 

All UK models and optional Non UK models are fitted with an overtemp device which isolates the gas 

supply to the burners should the gas control system or thermostat malfunction, thus preventing 

overheating of the griddle. 
The griddle uses a 20 mm thick griddle plate with the option of either ribbed or chromed mirror plate 

options and is available in either 900 mm or 1200 mm griddle size. 

 

With a heavy duty, high efficiency electric static or convection oven options, fitted with a 900 mm, 

6.5 kW electric static oven and a 6.6 kW Convection Oven created for compact modular kitchens.  

Both ovens are fitted with 4.5 kW bottom elements and 2.0 kW top element.  The Convection Oven 

is fitted with a 100 W oven fan motor. 

 

The appliance is built to facilitate easy cleaning and maintenance with all parts being front accessible 

once the appliance is installed. 

 

 

Summary of Contents for GP8910GE

































Reviews: