23
- Australia
- New Zealand
(*) Gas Control Valve is fitted with a non adjustable maximum flow bypass blanking
screw.
(**) Measure burner operating pressure at the gas control valve outlet test point with
burner operating at
‘
High
’
setting. Operating pressure is ex-factory set, through
appliance regulator and is not to be adjusted, apart from when carrying out gas
conversion, if required. (Refer to
‘
Gas Conversion
’
information in this section for
details).
GP8450G GP8600G GP8900G GP8120G GP8450G GP8600G GP8900G GP8120G
Main Burner Injector
3.00mm 3.60mm 3.00mm 2.85mm 1.80mm 2.10mm 1.80mm 1.70mm
Pilot Burner Injector
0.41
0.25
Low Fire Adjustment
1 Turn 'Out' c.c.w.
High Fire Adjustment (*)
Maximum Flow Screw. Fully In c.w.
Burner Operating Pressure (**) 0.90 kPa 0.85 kPa
0.90 kPa
2.6 kPa
2.5 kPa
2.6 kPa
Supply Pressure
1.13 - 3.40 kPa
2.75 - 4.50 kPa
Gas Regulator Cap Screw
GP8450G GP8600G GP8900G GP8120G GP8450G GP8600G GP8900G GP8120G
Main Burner Injector
3.00mm 3.60mm 3.00mm 2.85mm 1.80mm 2.10mm 1.80mm 1.70mm
Pilot Burner Injector
0.41
0.25
Low Fire Adjustment
1 Turn 'Out' c.c.w.
High Fire Adjustment (*)
Maximum Flow Screw. Fully In c.w.
Burner Operating Pressure (**) 0.90 kPa 0.85 kPa
0.90 kPa
2.6 kPa
2.5 kPa
2.6 kPa
Supply Pressure
1.13 - 3.40 kPa
2.75 - 4.50 kPa
Gas Regulator Cap Screw
Summary of Contents for GPB8450G
Page 30: ......
