System Configuration
85
Waldorf Kyra
System Configuration
Overview
Kyra’s System Configuration is the set of parameters that
allow you to configure Kyra to your requirements. To
access the System Configuration pages, press the
System
Edit
button in the Edit section.
Except for the Category Filter setting, all System Configura-
tion settings are stored automatically and retained when
the system is powered down. The Category Filter always
defaults to disabled (off) when Kyra is powered up.
Each of the System Configuration settings is described
below.
System Edit Pages
Master Volume
The
Master Volume
setting configures the level of Kyra’s
line outputs. This is applied at the final digital to analogue
conversion and is used to match the output of the system
to your amplifier, mixer or headphones. It does not affect
the USB audio streams. If you're using an external mixer or
amplifier, set the
Master Volume
control to its maximum
value and trim the levels on your mixer or amplifier. Mas-
ter Volume can also be set by a MIDI Universal SysEx De-
vice Control message. In both cases, the value set takes
effect immediately and is stored.
r
Remember that
Master Volume
control does not
affect the USB audio streams.
Soundcard Mode
Kyra’s
Soundcard Mode
allows you to route stereo audio
from your DAW to Kyra. The audio will be sent to Output A
(and correspondingly the headphone output). This allows
you to use Kyra as a ‘soundcard’ to render the audio from
your DAW (which could include sound from Kyra as well
as virtual instruments on your DAW). As ASIO (currently)
only allows on driver to be loaded at a time, you can’t have
Kyra and a separate soundcard active under ASIO on your
computer although there are workarounds such as asio4all
for Windows if you really want to use a separate sound-
Summary of Contents for KYRA
Page 1: ...USER MANUAL ...