Setup and Connections
11
M Manual
Setup and Connection
s
The Waldorf M comes complete with:
•
The Waldorf M Synthesizer
•
An external power supply
•
This printed Quick Start manual
Please ensure all the above items were included. If some-
thing is missing, contact your local dealer.
We recommend that you save the original packing material
for future transport.
Setup
Place M on a clean, even surface.
Connections
In order to get started with your M you will need an AC
power outlet, a mixing console, an amp, and/or an audio
monitor such as a speaker cabinet or a headphone.
You can also use a computer or sequencer to make use of
M’s MIDI features.
=
To connect the devices:
1.
Turn all devices off.
2.
Connect M’s
Main Out
audio outputs to your mi-
xing console or your computer audio interface. If
you want to connect an output monophonically,
only use the
L/Mono
jack of the output pair with
a 1/4 inch mono plug. Optionally connect the ste-
reo
Headphones
outputs to a suited headphone.
3.
If you want to use a computer, connect M’s
USB
2.0
port with a USB cable to your computer
(Windows or macOS). Thereafter, M becomes au-
tomatically available as a MIDI device.
4.
To play M you need a MIDI master keyboard.
Connect its MIDI Out jack to the M
́
s MIDI Input.
5.
Connect the power supply cable or the power
cable that came with your M with the power
supply jack. Plug the other side of the power
supply cable into a suitable AC power outlet.
6.
Press the power switch on the rear panel of your
M.
7.
Then switch on your computer (if connected), the
mixing console and finally the amplifier or active
monitor speakers.
Summary of Contents for M
Page 1: ...User Manual ...
