9
SPECIFICATIONS
7
Tips & Tricks
•
if you like to have have a full ADSR shape cycled, you would set the num-
ber of decay stages to 2, set the level of the second decay stage to zero
and use the second decay time as a release time.
•
Inv Out
provides negative voltages. This is useful for modulating filter cut-
off frequencies in the falling direction, which is sometimes applied for high
pass filters.
•
Especially together with the Waldorf nw1 wavetable module you can get
some exciting results by modulating the position of the wavetable by the
AD3SR and modulating the spectrum with the symmetry generator. You
will be delighted.
•
Try to use the AD3SR as a sync source or a PWM source. It works fine as
well with interesting results.
8
Troubleshooting
8.1
Modules Power Fail
•
Check the orientation of the pin headers on your modules
•
Check if the total power consumption of your modules does not exceed
the specifications of your case/frame power supply
9
Specifications
Power Supply:
+12V/150mA, -12V/150mA
Width:
30HP, 152.4mm
Height:
3U, 133.3mm
Depth:
25mm
Total Weight:
350g
Technical specifications and design are subject to change without notice.
10