User’s Manual Pulse • PulsePlus
17
7.4 The Store Function
After you have finished editing a program, you must save it if you intend to use it again. The
program memory locations 1 through 40 are available for this purpose.
☞
This is how you store a program:
• Press and hold the
Shift
key
햺
.
• Briefly press the Scroll key
▼
햽
. This Scroll key's alternate function is
Store
,
indicated in orange lettering.
• Release the
Shift
key
햺
.
• A flashing
S.
appears in front of the selected program number in the display:
The indicated memory location number will always be from 1 to 40, i.e. within the
range of the freely programmable memory locations. If you have edited a factory
preset program, it must be stored in one of these memory locations. The Pulse will
suggest a program number equivalent to the original number plus 40.
Original Program
Suggested Program
1...40
1...40
41...80
1...40
81...99
1...19
P.rn
20
• If you want to store the program at a memory location other than the suggested
one, use the Scroll keys
▲
and
▼
to select the desired program number.
• Press and hold the
Shift
key
햺
and press the
Store
key
햽
again.
You have now stored the program.
When you activate the Store function, Edit or Compare modes are terminated.
By pressing the
Mode
key
햶
, you can terminate the process at any time before you
press the
Store
key
햽
for the final time.
Example: Program 9 is the selected
memory location
