background image

11 

Assembly 

Bench Mount (B) Models 

1. 

Check that all the feet are fitted. 

2. 

Adjust the four feet to make the hob steady and level. 

 

Optional Accessories (Refer to Replacement Parts List) 

• 

Plinth Kit.  For installation details, refer to the instructions supplied with each kit. 

 

Leg Stand (LS) Models Only 

Fitting of Adjustable Feet / Rear Rollers to Leg Stand Units. 

1. 

Securely restrain or remove the elements or griddle plate modules from the electric cooktop. 

2. 

Lower the appliance onto it’s rear face. 

3. 

Attach the four hob legs to the leg mounting positions on the underside of the appliance.  Secure 

each leg hand tight. 

4. 

Align the four round cut out holes on the base tray with the four hob legs already fitted to the 

appliance (Ensure that the base tray is orientated with the sloping edge of the base tray facing the 

front of the appliance. 

5. 

Slot the base tray onto the four hob legs and push fully home. 

6. 

Secure the base tray to the appliance legs by screwing the two front adjustable feet supplied, into 

the base of the front appliance legs.  Secure each adjustable foot, hand tight. 

7. 

The two rear leg housings can be fitted with either adjustable legs or rollers.  (See Figure 1). 

 

NOTE: 

• 

This appliance is fitted with adjustable feet to enable the appliance to be positioned  
securely and level.  This should be carried out on completion of the gas connection.  Refer 
to the “Gas Connection” section overleaf. 

• 

Rear Roller Kit - For installation details, refer to the instructions supplied with the kit. 

• 

Plinth Kit - For installation details, refer to the instructions supplied with the kit. 

 

Installation

 

WARNING: 

 

TO

 

PREVENT

 

EQUIPMENT

 

DAMAGE

 

AND

 

RISK

 

OF

 

INJURY

, '

SECURELY

 

RESTRAIN

THE

 

ELEMENTS

 

AND

 

GRIDDLE

 

PLATE

 

MODULES

 

AND

 

REMOVE

 

ALL

 

OTHER

 

REMOVABLE

 

ITEMS

 

PRIOR

 

TO

 

FITTING

 

THE

 

LEG

 

STAND

C

AUTION

 

• 

This appliance is for professional use and is only to be used by qualified 
persons. 

• 

Only qualified service persons are to carry out installation and servicing of 
this appliance.

 

Summary of Contents for RN8400E




























Reviews: