12
Installation
Rear Adjustable Feet, fitting:-
a.
Secure the rear of the base tray to
the rear cooktop legs by screwing the
two adjustable feet supplied, into the
base of the rear cooktop legs.
b.
Secure each adjustable foot, hand
tight.
Rear Rollers, fitting:-
a.
Fit the rear leg securing bolts up
through the centre of the rear leg
housings to secure the rear of the
base tray to the rear cooktop legs and
tighten up the bolts using a 24mm
socket.
b.
Fit the rear rollers to the rear leg
supports.
c.
Secure the rear rollers to the rear leg
supports using the locating bolts
supplied.
d.
Tighten the locating bolts using a
10mm spanner.
8.
Lift the cooktop back onto its legs / rollers
and remove the restraints or refit all the
elements and griddle plates to the cooktop,
ensuring that they are correctly fitted.
9.
Adjust the adjustable feet to level the
appliance.
Fig 1
Cooktop
Cooktop
Legs
Base Tray
Leg Mount
Points
Adjustable
Foot
Rear
Roller
Rear Leg
Securing Bolt
Roller
Locating Bolt
Rear Leg
Housing
Summary of Contents for RN8400E
