17
5.
Brush the elements with a soft bristled brush. Any
carbon deposits should be removed using a scraper
tool followed by wiping with a cloth moistened in a
solution of hot water and detergent to prevent
accumulation of food deposits.
6.
To clean under the elements, carry out the following
procedure:-
a. Lift up the element module at the front of the
cooktop.
b. Whilst holding up the front of the element module,
pull the module as far forward as it will come.
c. Rotate the element module around the element
pivot plate on whichever side of the cooktop that
the module is located.
d. Remove the drip tray from beneath the element
and wash with hot water and a detergent solution.
Dry with a soft dry cloth.
e. Clean beneath the element using a cloth
moistened in a solution of hot water and
detergent.
f. Refit the drip tray beneath the element ensuring
that the drip tray is fitted correctly.
g. Lower the element module back down to the cook-
top frame and slide rearwards to fit back into
position on the cooktop surface.
7.
Dry the range thoroughly with a dry cloth and polish
with a soft dry cloth.
Cleaning and Maintenance
Lift up Front of
Element Module
Pull Element
Module Forwards
Rotate Element
Support Element and
Lift out Drip Tray
L/Hand Element
Pivot Plate
R/Hand Element
Pivot Plate
Summary of Contents for RN8400E
