background image

24 

Replacement Parts List

 

Replacement Parts List 

When ordering replacement parts, please quote part number and description as listed below.  If part 

required is not listed below, request part by description and quote model number and serial number which 

is shown on rating plate. 

 

 

Cook Top 

Open Burners 

227018 Burner 

Bowl. 

227017 Burner 

Cap. 

030245 Injector 

(Nat. 

Gas) 

Ø 

2.45mm. 

030150 

Injector 

(LP Gas [Propane]) 

Ø 1.50mm. 

030230 

Injector 

(Natural Gas - G20) 

Ø 2.30mm  (UK Only). 

030140 

Injector 

(Propane - G31) 

Ø 1.40mm  (UK Only). 

026134 Pilot 

Injector (Nat 

Gas) 

0.30. 

026136 

Pilot Injector 

(LP Gas [Propane]) 

0.20. 

229442 

Pilot Bracket Assembly. 

229444 Pilot 

Burner 

Shield. 

227405 

Gas Control Valve  (with Flame Failure). 

227403 

Gas Control Valve  (with Pilot & Flame Failure). 

227967 

Knob - Open Burner (with Flame Failure). 

227384 

Knob - Open Burner (with Pilot & Flame Failure). 

228167 

Thermocouple - 320 mm Front. 

228166 

Thermocouple - 600 mm Rear. 

 

Griddle 

014105 Burner. 
032210 Injector 

(Nat. 

Gas) 

Ø 

2.10mm. 

032130 

Injector 

(LP Gas [Propane]) 

Ø 1.30mm. 

227403 

Gas Control 

(with Pilot & Flame Failure). 

227384 Knob 

Griddle. 

019215K Pilot 

Burner 

Kit. 

026488 Pilot 

Injector  (Nat. 

Gas) 

0.35. 

019217 

Pilot Injector 

(LP Gas [Propane]) 

0.23. 

019428 Thermocouple. 

227508 Piezo 

Ignitor. 

228047 

Piezo H.T. Lead. 

018744 

Piezo Ignition Electrode. 

228288 

Grease Tray 

(Griddle Plates). 

 

Regulator 

228531 

Regulator (Natural Gas/LP Gas [Propane] Convertible) ¾” BSP F/F. 

IMPORTANT: 

 

Only genuine authorized replacement parts should be used for servicing and  
repair of this appliance.  Instructions supplied with parts should be followed 
when replacing components. 
 
For further information and servicing instructions, contact your nearest 

 

authorized service branch (contact details are as shown on reverse of front 
cover of this manual). 

Summary of Contents for RN8610G





























Reviews: